IN WORK
This Sharps Borchardt (patent pending) is the next generation of the fabulous Borchardt and is available with either a
single trigger or a double set trigger. The single trigger is for sporting applications. The double set trigger uses the
rear trigger to set the front firing trigger for match shooting. The double set trigger can also use the front trigger unset
for sporting use. The trigger assembly can be removed from the receiver as an assembly when the stock is off the
action.
When the lever is cycled to open the receiver the safety is automatically set. The safety is on in the middle position
and can be released in either direction with the index finger or thumb making this action ambidextrous for left or right
hand shooters. The safety is also quieter than the original.
This double set design is superior to the Zischang design in its function and it also incorporates the automatic safety
that was not used in the Zischang.
All of the springs are internal including the lever spring which was originally mounted on the barrel. A roller is used
against the lever.
A tang sight base is on the tang. It is not slotted allowing custom machining to mount your favorite tang sight. The
mounting base can be machined off if a tang sight is not desired.
The stock is held on with a long bolt through the center.
single trigger or a double set trigger. The single trigger is for sporting applications. The double set trigger uses the
rear trigger to set the front firing trigger for match shooting. The double set trigger can also use the front trigger unset
for sporting use. The trigger assembly can be removed from the receiver as an assembly when the stock is off the
action.
When the lever is cycled to open the receiver the safety is automatically set. The safety is on in the middle position
and can be released in either direction with the index finger or thumb making this action ambidextrous for left or right
hand shooters. The safety is also quieter than the original.
This double set design is superior to the Zischang design in its function and it also incorporates the automatic safety
that was not used in the Zischang.
All of the springs are internal including the lever spring which was originally mounted on the barrel. A roller is used
against the lever.
A tang sight base is on the tang. It is not slotted allowing custom machining to mount your favorite tang sight. The
mounting base can be machined off if a tang sight is not desired.
The stock is held on with a long bolt through the center.